Get Started with Smart
Learn how to connect your TROXLLY system with the Smart Life app and get started in minutes.
Easily monitor and control your saltwater system from your smartphone with the Smart Life app.
Callout Box / Buttons：
- Download from the App Store or Google Play
- Or scan the QR code below to get started
- Requires 2.4GHz Wi-Fi connection
Setup Guide
Step 1:Install the App
Scan QR or search “Smart Life – Smart Living” in app stores.
Step 2: Enter Pairing Mode
Tap the“Settings”button once until the screen displays “CoN”.
Then press the“+”or“–”button once to enter pairing mode.
The Wi-Fi icon will begin blinking when pairing mode is active.
Step 3: Enable Phone Wi-Fi & Bluetooth
Ensure your phone is on 2.4 GHz Wi‑Fi.
Step 4: Add Your Device
In app: + → Discover Devices → Select your TROXLLY unit → Enter Wi‑Fi password.
Tip: If not detected, use “Add Device” to search manually.
What You Can Do with the TROXLLY App
Core Controls
- Adjust chlorine output (±)
- Turn the system ON/OFF
- Switch between Strong Mode / Winter Mode
Monitor & Maintain
- View water temperature, salinity, and flow status
- Rename your device for easy identification
- Check total runtime and fault logs
Advanced Settings
- View voltage parameters (Vp, Vn, R%)
- Adjust cell polarity change time to reduce scaling
Calculate the Right Amount of Salt for Your Pool
Keep your pool water balanced and crystal-clear by entering your pool’s volume — the app will instantly calculate the salt required to reach the ideal salinity level (3500 PPM).
How to use:
- Tap the input field and enter your pool’s volume (between 5,000–1,000,000 L).
- Toggle between liters/kilograms or gallons/pounds depending on your preference.
- After changing units, please re-enter the water volume.
- If no result appears, check your network connection and try again.